Floor Varnish - Polyvine Heavy Duty Floor Varnish - Satin and Dead Flat
Polyvine Heavy duty floor varnish
Hard and durable, crystal clear with cross linked protection - fast drying, it protects a wide range of surfaces. This high quality cross linked lacquer dries to a hard, crystal clear satin or high gloss film, with extremely good sanding properties and is specially formulated to bond to a wide range of surfaces - it can also be used as a multi surface primer.
Ideal for - metal surfaces , laminate, timber surfaces , tile, ceramic, glass, plastics
Unique qualities • Interior
Very hard and durable finish
1-2 hour drying time
Water wash up
Preparation All surfaces must be clean and free from dust, dirt, oil and contamination. Timber: Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Application Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat and allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.
Caution Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible.
Storage Protect from extremes of temperature during storage and application.
Health, Safety and the Environment Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.